Amika AMH45 Glasswasher
£1,510.00
Simple easy to use controls and surface scrap trays supplied as standard. The Halcyon Amika AMH45 glasswasher is a great entry level commercial glasswasher, ideal for pub’s and bars.
A great entry level glasswasher. The Amika AMH45 glasswasher is a fantastic choice for pubs and bars. Optimum conditions allow for a cycle time of just 120 seconds.
- 1 year warranty
- Accurate detergent & rinse aid peristaltic dosing pumps with dosing setup by fascia controls
- Easy clean parallel wash and rinse arm assembly
- Drain pump or gravity drain version available
- Surface scrap tray filters supplied as standard
- Supplied with two open cup/glass racks & cutlery insert as standard
Options include gravity drain or pumped drain and this commercial glasswasher can be purchased with a full warranty or parts only warranty.
Supplied fitted with a standard 13 Amp plug and cable.
The supplied feet raise the height by between 10 and 20mm and this helps balance the glasswasher on uneven floors.
The wash temperature is set at 60°C. The rinse temperature is 65°C.
Suitable for hot and cold water supply at a maximum of 50°C typically at between 2 to 4 bar dynamic water supply pressure.
Should you need them we can supply extra baskets and chemicals for your new Amika AMH45 glasswasher. We can also supply stands and water softeners. Please visit or Ancillaries page.
If you would like any help or advice please contact our sales advisors.
Please not drain pump models require a waste up stand for correct operation.
| Dimensions | 560 × 525 × 705 mm |
|---|---|
| Drain | Gravity, Pumped |
| Warranty | Parts Only, Full Warranty |
| AMH45 | Glasswasher |
|---|---|
| Width x Depth x Height mm | 525 x 560 x 705mm |
| Feet Height | 10mm-20mm |
| Basket size | 450x450mm |
| Maximum useable height | 280mm |
| Door Opening | 305mm |
| Cycle times | 120 seconds |
| Water consumption per cycle | 2.0 Litres |
| Wash tank capacity | 14 Litres |
| Phase – Options | Single Phase Only |
| Power – Single Phase Options | 2.8kW(13AMP) |
| Power – Three Phase | N/A |
| Detergent pump | Peristaltic-non timed |
| Rinse aid pump | Peristaltic-non timed |
| Drain pump | Choice |
| Breaktank | No |
| Water supply pressure | 2 to 4 Bar |
| Body Construction | Single skin |
| Door/Hood Construction | Double Skin |
| Scrap Trays | Yes |
| Internal Rinse Booster Pump | N/A |
| Number Of Cycles | 1 |
| Total Maximum Load(as supplied) | 2.8kW(13Amp) – Single Phase |